Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are some of the most common jets used.
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc.
Bug (Type 1): IDF,IDA
Bus (Type 2): IDF,IDA
Type 3: IDF,IDA
Ghia: IDF,IDA
Thing: IDF,IDA
Race/Off-Road: IDF,IDA
No customer reviews for the moment.
Part #: 112950503IDA
Fast Idle Screw and Spring
Application:Part #: N137761
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 112950505IDF
Throttle Shaft Lock Tab Washer for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 1129510A
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129516
Empi Hex Bar Linkage Bearing Conversion Kit
Application:Part #: 1129505011
These are some of the most common jets used.
Application:Part #: 1129511
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129512
Empi Hex Bar Linkage for 48/51 EPC and 48 IDA (works with and without Air Cleaners)
Application:Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 1129026
34 Pict Carburetor spacer plate, measures 3/8" thick with 2 11/16" hole to hole
Application:Part #: 112950506IDF
Throttle Shaft Nut for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 1129199150
Needle Valve for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 1.50mm
Application:Part #: 113129027HBR
Carburetor 30 Pict 1300-1600
Application:Part #: 1129511A
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 112920330
30mm Main Venturi for 40IDF or HPMX
Application:Bug (Type 1); IDF
Bus (Type 2); IDF
Type 3; IDF
KG; IDF
Thing; IDF
Off Road; IDF
Part #: 1129034E
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:
These are some of the most common jets used.
