Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are some of the most common jets used.
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc.
Bug (Type 1): IDF,IDA
Bus (Type 2): IDF,IDA
Type 3: IDF,IDA
Ghia: IDF,IDA
Thing: IDF,IDA
Race/Off-Road: IDF,IDA
No customer reviews for the moment.
Part #: 1129139
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: N137761
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1129802
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 113129027HBR
Carburetor 30 Pict 1300-1600
Application:Part #: 112950506IDF
Throttle Shaft Nut for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 112950503IDF
Cupwasher for Idle Jet O-ring for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 112950501IDF
Mixture Screw for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 113129323C
Here are some of the replacement parts for your stock carburetor.
Application:Part #: 1129517
Linkage Ball End Bushings, Pair
Application:Part #: 1129511A
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129199150
Needle Valve for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 1.50mm
Application:Part #: 1129040E
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129511B
Kadron Carburetor Linkage Ball Socket Ends, 10/32 Left & Right, Pair
Application:Part #: 211129493
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: 1129508
These are some of the most common jets used.
Application:Part #: 1129512
Empi Hex Bar Linkage for 48/51 EPC and 48 IDA (works with and without Air Cleaners)
Application:
These are some of the most common jets used.
