Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are some of the most common jets used.
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc.
Bug (Type 1): IDF,IDA
Bus (Type 2): IDF,IDA
Type 3: IDF,IDA
Ghia: IDF,IDA
Thing: IDF,IDA
Race/Off-Road: IDF,IDA
No customer reviews for the moment.
Part #: 11295076IDF
6" Chrome Velocity Stacks, Pair
Application:Part #: 111129493A
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: 1129201300
EPC 48/51 3.0 Needle and Seat IDA 300
Application:Part #: 1129139
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129505115
These are some of the most common jets used. Sold in Pairs
Application:Part #: 1129505002
These are some of the most common jets used.
Application:Part #: 113129415B
Here are some of the replacement parts for your stock carburetor. Sold individually.
Application:Part #: 113198575URP
This kit comes with the gaskets, the needle and seat, and accelerator pump diaphragm for the carburetor..
Application:Part #: 1129516
Empi Hex Bar Linkage Bearing Conversion Kit
Application:Part #: 113129027HBR
Carburetor 30 Pict 1300-1600
Application:Part #: 112950503IDA
Fast Idle Screw and Spring
Application:Part #: 1129044
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 112950501IDF
Mixture Screw for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 1129044E
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129505007
These are some of the most common jets used.
Application:
These are some of the most common jets used.