Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These are some of the most common jets used. Sold in Pairs
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc. Sold in Pairs
No customer reviews for the moment.
Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 1129201300
EPC 48/51 3.0 Needle and Seat IDA 300
Application:Part #: 1129033
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 049129412C
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1129508
These are some of the most common jets used.
Application:Part #: 113129415B
Here are some of the replacement parts for your stock carburetor. Sold individually. No. 70
Application:Part #: 1129034E
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 1129504115
These are some of the most common jets used. Sold individually.
Application:Part #: 112950503IDA
Fast Idle Screw and Spring
Application:Part #: 1129306075
These are some of the most common jets used.
Application:Part #: 1129044
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129310
Empi Idle Jet Vent Tube Kit
Application:Part #: 1129506PRO
Velocity Stack Covers, for 48IDA/EPC 48 & EPC 51 Carbs, Pair Inside Diameter is 3.850"
Application:Part #: 111129405C
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1129039E
Empi Dual 40mm Carburetor complete setup
Application:Part #: 1129510A
We've found that dual carbs work better than any single carburator set up.
Application: