Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This bow goes into the metal frame of the rear window. The convertible top fastens to it. Plastic bows are available, but we carry the quality synthetic-wood bows because the top tacks better to them than plastic and they don't rot. Note: Measurements are taken from extreme outside edge to the extreme outside edge of the frame.
Bug (Type 1): 75 1/2-79
No customer reviews for the moment.
Part #: N141389
Convertible Top Latch Screw (2 Required)
Application:Part #: 151837626B
Vent wing seals on the front doors keep out the elements.
Application:Part #: 151871049B
This is what you see whey you look up at the header bow.
Application:Part #: 153871373A
This is a sleeve that goes in the front window frame for the guide pins to sit in.
Application:Part #: 151871046C
This boot keeps the wind from ripping up your top when it is down.
Application:Part #: 151871449DM
Convertible Rear Window Metal Frame only
Application:Part #: 151871359B
These strips screw to the top.
Application:Part #: 151871193B
These are the bows in the quarter areas that the top staples to.
Application:Part #: 151871093B
Bow, Above Rear Window, Convertible only
Application:Part #: 151871400
Convertible Top Chrome Molding Kit
Application:Part #: 151837627B
For convertibles, this is the upper pin that the vent wing pivots on.
Application:Part #: 151871198A
This is the pad between the top material and the headliner.
Application:Part #: 151871353C
This seal goes on the windshield post to seal the vent wing.
Application:Part #: 155871401
This is what holds the top closed.
Application:Part #: 151871349A
This sels the leading edge of the top to the front window frame..
Application:Part #: 151871197A
This is the pad between the top material and the headliner.
Application: