Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Convertible Top Frame Butt Plates
Convertible Top Frame Butt Plates
Bug (Type 1): mid 60-64
No customer reviews for the moment.
Part #: 6501149108K
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 113845121JAM
This seal goes around the front window.
Application:Part #: 133133511
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 1129044
We've found that dual carbs work better than any single carburator set up.
Application:Part #: JC86070
Jaycee Billet 7" Crank Pulley for Street Cars, Silver
Application:Part #: 265867515A
Roof Lining, Grey, Double Cab
Application:Part #: 043119351B
Heater Channel Tin Left
Application:Part #: 211885805
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 6711149
This box is made so you can weld it to a piece of 1 1/2" tubing and mount it to your shifter.
Application:Part #: 6881410AYL
These seats are better than the fiberglass, but still no where near as good as beard seats.
Application:Part #: 113845521BAM
This seal is for the rear window.
Application:Part #: 261863012
These are the interior panels.
Application:Part #: 1141027
Kennedy Stage 3 Pressure plate 2600 LB
Application:Part #: 211301265
These rubber mounts hold the transmission in place.
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 113953041N
This is the whole unit, lens and bulb holder.
Application:
Convertible Top Frame Butt Plates