Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This polished stainless steel firewall dresses up your engine compartment.
This polished stainless steel firewall dresses up your engine compartment. We like to run insulation behind these firewalls because it helps to quiet the engine noise. The white side goes out. Once installed, remove the white protective coating covering the stainless steel. Note: Take your rear bellhousing engine tin and trace it onto the bottom of the new firewall, and then cut it out. This will allow the engine to go in easier. Be careful, the metal is sharp.
Bug (Type 1): All
No customer reviews for the moment.
Part #: 133813705
This seal goes between the body and the engine.
Application:Part #: 113827906
License Plate Bracket, Rear
Application:Part #: 1827027
Rain deflectors allow air into your engine compartment to cool it, but still keep the rain out.
Application:Part #: 1827152
These are a must if you live in an area were the temperature reaches 100 degrees or more.
Application:Part #: 111827705
This is the seal that goes around the rear deck lid.
Application:Part #: 113827902A
License Plate mounting Bracket, Rear
Application:Part #: 113898805
This is a great way to quiet your car down.
Application:Part #: 1827705
Just like the front mexican style seal, this seal clips to the deck lid instead of the body..
Application:Part #: 111813311
Channel, Hood and Engine Weatherstrip, 43" Length
Application:Part #: N200223
Rear Apron Plug/ Anti Rattle/ Bus Cargo Floor
Application:Part #: 211827345
Engine Deck Lid Prop Bolt
Application:Part #: 131823499
This is the rubber stop in the rear apron that the deck lid sets on.
Application:Part #: 111813741G
This seal goes between the body and the engine.
Application:Part #: 111813162
Engine bay shelf right.
Application:Bug (Type 1); 61-66
Part #: 1813115
Stainless Steel Carb Windows
Application:Bug (Type 1); All
Part #: 1827153
Looking for quick access to your engine, quick release pins are the answer.
Application:
This polished stainless steel firewall dresses up your engine compartment.
