Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is the beading that goes between the fender and the body.
This is the beading that goes between the fender and the body. The best way to install the beading is to loosely bolt the fender on, leaving a gap so you can get the fender beading started. Slip the beading into place and pre-fit to make sure all the holes line up and that the beading sits correctly. With the beading in place, start on one end and push it down and tighten the fender bolts one at a time.
Bug (Type 1): All
No customer reviews for the moment.
Part #: 113819448
This is the crescent shaped grill that goes behind the quarter windows.
Application:Part #: 113853505FSL
Hood Molding
Application:Part #: 113853505H
This is the front strip that goes down the front hood.
Application:Part #: 133853535CSL
Body molding kit stainless steel
Application:Part #: 1821305A
These were originally sold as an accessory by the dealer.
Application:Part #: 133853265
These are the wide trim piesces that fit on the front quarter panles of a Super Beetle..
Application:Part #: 111821707BTN
This is the beading that goes between the fender and the body.
Application:Part #: 133853535C
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: 111821531A
Running Board Material, Left
Application:Part #: 113853615
These are three little plastic pieces that push into the front hood to hold the emblem in place.
Application:Part #: 111821532A
Running Board Material, Right
Application:Part #: 151853325B
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 151853530
These are the molding strips that go on top of the front doors and quarters.
Application:Part #: 113853345B
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 113853559
These are the clips that hold the various chrome moldings on.
Application:Part #: 1821531BSB
Billet Look Running Boards, Satin Black/Polished Edge, Vintage Style, Pair
Application: