Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These replace the stock front hood spring with a gas charged strut.
These replace the stock front hood spring with a gas charged strut. Installation is requires you drill out the stock riviot on the hood hinge, then they just bolt in.
No customer reviews for the moment.
Part #: 133863507
Front Trunk Liner Upper
Application:Part #: 113863527A
These two nuts hold the cover on that goes over the wiring in the trunk.
Application:Part #: 113863505
This is the replacement cardboard liner for under the front hood.
Application:Part #: 1823731
This seal clips on the hood instead of the body.
Application:Part #: 113823731BGR
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 111813311
Channel, Hood and Engine Weatherstrip, 43" Length
Application:Part #: 113823731B
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 133823719
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 1823565
This guard goes underneath the front hood handle to prevent your fingernails from scratching the paint..
Application:Part #: 113863515B
Wiring Cover
Application:Part #: 113863509C
Front Trunk Liner
Application:Part #: 111823731
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 113863527
Nut for Wiring Cover
Application:Part #: 1863515A
This plastic cover under the front hood, covers up all the wiring.
Application:Part #: 133863507D
Front Trunk Liner Upper
Application:Part #: 111701573A
Inspection Cover
Application:
These replace the stock front hood spring with a gas charged strut.
