Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the seal that goes on the body for the front hood to sit on.
This is the seal that goes on the body for the front hood to sit on. It seals the trunk compartment. Removing the old seal is just a matter of ripping it out. Before you try and put the new seal in, take some time and straighten out the groove it goes in. To put the seal in, start on one side in an upper corner, use some dish soap on the seal and slide it from one side to the other corner then down both sides. On Bugs 1961 on, stick the little nubs in the corner through the holes and use a pair of needle nose pliers to pull the nubs all the way through. On Super Beetles they have pins that hold the seal in the corners. Don't stretch the rubber, as overtime it will shrink.
Bug (Type 1): 61-77, SB,71-72
Offroad/Race: 61-77
No customer reviews for the moment.
Part #: 113707333A
These brackets hold the bumpers on.
Application:Part #: 6251015CC
Off-Road Competition exhaust systems with stainless steel mufflers.
Application:Part #: 181937555
This is a replacement fuse box.
Application:Part #: 151871033
This is the outer skin on your convertible.
Application:Part #: N203551C
We only carry metric hose.
Application:Part #: 211611805H
Brake tube
Application:Part #: 1101474
These covers look good but have a tendency to leak.
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: 1101386
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1119031BHD
Motors with high horsepower and motors that rev fast run the risk of exploding a stock fan.
Application:Part #: 113847133A
These seals are for the side popout windows.
Application:Part #: 1881040
We really like the style and comfort that these seats provide.
Application:Part #: 251945111A
This assembly comes with the bulb holder and lens.
Application:Part #: 211703391B
This support goes inbetween the main frames of your Bus.
Application:
This is the seal that goes on the body for the front hood to sit on.
