Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the handle attached to the end of the cable that releases the gas door.
This is the handle attached to the end of the cable that releases the gas door. In many cases people hang pliers or vise grips from the cable when the handle breaks. This handle is a cheap way to alleviate that kind of hassle.
Bug (Type 1): 62-79
Off-Road: 62-79
No customer reviews for the moment.
Part #: 113819519C
This gasket goes around the fresh air box and seals against the hood.
Application:Part #: 113863505
This is the replacement cardboard liner for under the front hood.
Application:Part #: 113863509B
Front Trunk Liner
Application:Part #: 1823319
These replace the stock front hood spring with a gas charged strut.
Application:Part #: 111701573B
Inspection Cover
Application:Part #: 113863505B
This is the replacement cardboard liner for under the front hood.
Application:Part #: 113823731B
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 133823731B
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 1863515A
This plastic cover under the front hood, covers up all the wiring.
Application:Part #: 113863527
Nut for Wiring Cover
Application:Part #: 1823731
This seal clips on the hood instead of the body.
Application:Part #: 133863507
Front Trunk Liner Upper
Application:Part #: 111701573A
Inspection Cover
Application:Part #: 113863515B
Wiring Cover
Application:Part #: 113863509C
Front Trunk Liner
Application:Part #: 113823731BGR
This is the seal that goes on the body for the front hood to sit on.
Application:
This is the handle attached to the end of the cable that releases the gas door.