Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor. The non fuel injection filter will fit either a 5mm line or a 7mm line.
Bug (Type 1): -74
Bus (Type 2): -74
Type 3: -67
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 113201557E
Gas cap gasket
Application:Part #: N203631
Vent Hose, Filler to T, 14mm x 215mm
Application:Part #: 113201075AB
These are new Brazilian tanks.
Application:Part #: 113201621
This is the packing that goes around the gas tank opening, sealing off air and dirt from entering the trunk.
Application:Part #: 111919051
Fuel Tank Sending Unit
Application:Part #: 133201181
Breather Hose
Application:Part #: 113201157
Fuel Breather "T"
Application:Part #: 343201551C
Locking Gas Cap
Application:Part #: 133133511
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 111209147A
This tube like screen is located in the bottom of the gas tank.
Application:Part #: 113919131A
The sending unit registers the fuel level on the gauge. This is the seal that goes around that sending unit
Application:Part #: 311201219A
This hose goes from the filler neck to the tank.
Application:Part #: 111809905D
Fuel Filler Door
Application:Part #: 111209113A
Fuel Tap Rebuild Kit
Application:Part #: 113201075AD
These are new Brazilian tanks.
Application:
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.