Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The sending unit registers the fuel level on the gauge.
The sending unit registers the fuel level on the gauge. There were two types, mechanical for Bugs up to 1967 and electrical for Bugs 1968 and on. There is no such thing as 6v or 12v electrical sending units, as they have a floating ground. Before replacing the electrical unit, take the wire off of it and hold it to ground (a bolt or metal on the body). CAUTION: WHENEVER WORKING AROUND LIVE WIRES AND GAS BE VERY, VERY CAREFUL. Turn the key on. If the gauge goes to full, the sending unit is bad. If it doesn't, the gauge and or the vibrator is bad.
Bug (Type 1): 62-67
Ghia: 62-66
Race/Off-Road: 62-67
No customer reviews for the moment.
Part #: N203631
Vent Hose, Filler to T, 14mm x 215mm
Application:Part #: 111201551C
Gas Cap, 80mm with Gasket
Application:Part #: 111209189A
This grommet goes around the fuel line to protect it from getting cut (due to vibrations) where it comes out of the tunnel through the pan.
Application:Part #: 111919051
Fuel Tank Sending Unit
Application:Part #: 131298221
This pipe comes out of the bottom of your gas tank.
Application:Part #: 113201215
This is a small rubber sleeve that goes on the neck of the gas tank before you slide the fuel filler hose on..
Application:Part #: 133201179
Fuel Elbow, "T" to Filler Neck
Application:Part #: 133201075G
These are new Brazilian tanks.
Application:Part #: 113919051F
The sending unit registers the fuel level on the gauge.
Application:Part #: 211201557E
Gas Cap Gasket, 70mm
Application:Part #: 211201105
Fuel Sender Blockoff Plate
Application:Part #: 113201621
This is the packing that goes around the gas tank opening, sealing off air and dirt from entering the trunk.
Application:Part #: 111201261
Fuel Breather Hose Clip
Application:Part #: 111209113A
Fuel Tap Rebuild Kit
Application:
The sending unit registers the fuel level on the gauge.