Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 211405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis and come with the alignment eccentrics. Just pull your old arms off and install the new ones. Ball joints are hard to check, especially if they are marginal. To check your ball joints, grab the top of the tire and try to shake it. If the tire moves and you see movement in the ball joint, it needs replacing.
All steering box cores must be sent first, before we can send you a rebuilt one. Our stock on these are so low that we cannot chance people not sending cores back. Your box must be and “F” box for 68-72 or a “ZE” or “ATE” box for 55-67. We cannot use any other cores, so please check that you have a rebuildable box before sending.
For all other cores, you have two options. You can send in your core first to avoid having to pay the core fee up front when ordering, or, you can pay the core charge and when we get your core in we will credit you back. You can choose to have it refunded to your card or you can have it put as credit on your account toward future purchases. When sending your core to us, please include your full name and telephone number.. You may choose to have your specific item rebuilt and sent back to you, but that must be made apparent when you send in your core.
We will call you after we have received and reviewed your cores. Most of the cores we receive are rebuildable, however, there are a few that are not able to be rebuilt. We will let you know when we call you whether yours are rebuildable or not, and figure out the next step.
Some reasons why your item might not be accepted:
Steering Boxes:
- Bent steering shaft 55-62
- Completely rusted, won’t turn
- Peg & worm destroyed
Spindles:
- Worn out king pin housing
- Bent spindle
- Spindle threads hammered, cut, or modified
Ball Joints:
- Bent
- Bearing surface pitted/destroyed
IRS:
- Bearing surface too bent, modified, broken.
There may be an additional fee if your item is damaged, yet salvageable/repairable.
Steering boxes that are not usable will be sent back and you will need to find another usable core before you can purchase a rebuilt box.
Bus (Type 2): 71-79
No customer reviews for the moment.
Part #: 1101482EMP
This is the replacement mounting hardware kit for Channel Gasket Style Valve Covers.
Application:Part #: 1867169
If you don't want arm rests on your door panels or don't like pulling the door closed with them, then this is the way to go.
Application:Part #: 211853619
These are three little plastic pieces that push into the front hood to hold the emblem in place.
Application:Part #: 1821531BSB
Billet Look Running Boards, Satin Black/Polished Edge, Vintage Style, Pair
Application:Part #: 171823500BIL
Billet Hood Pull Knob
Application:Part #: 265809591
Intermediate Rocker Panel Goes between Inner and Outer Rocker as a Reinforcement
Application:Part #: 111945241D
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 311405641B
These are the inner bearing seals on the drums or rotors.
Application:Part #: 261201651
Fuel Tank Mounting Strap, Set of 2
Application:Part #: 221809101E
Complete Left Side Panel NO SHIPPING!!!
Application:Part #: 1698152Q
Premium Front Brake Pads for Brake Kit # 1615100F
Application:Part #: 1881405CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 2711101SS
Stainless Steel Gear Shift Extension
Application:Part #: 113863402
This is a full carpet kit.
Application:Part #: 211721335B
This cable pulls the arm that releases the clutch.
Application:
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 211405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.