Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Engine Deck Lid
Bus (Type 2); 68-71
This is the rear deck lid that covers your engine compartment. It is held on by some hinges that use a phillips screw. I would suggest replacing the hinges at this time too.
No customer reviews for the moment.
Part #: 1711107
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:Part #: 111821707BRR
This is the beading that goes between the fender and the body.
Application:Part #: 043101129
This is the washer used under the nuts on cases that use an o-ring on the center main studs.
Application:Part #: 1119517CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1601103
These are studs and nuts for different types of wheels.
Application:Part #: 1601153EXT
Replacement Extended Center cap for Sprintstar, Riviera, and 914 rims
Application:Part #: 111819945
Heater Hose to Body Seal
Application:Part #: 211817216
Headliner Grip Strip to Roofline Perimeter Fresh Air or Sunroof Applications, 6 Required per Bus
Application:Part #: T1501331
If you plan to take off your CV joints you will need this socket.
Application:Part #: 6805591
These kits are really thick and have a great fitting hood.
Application:Part #: 1101446
This is a shim that is used between the head and barrel.
Application:Part #: N109701
This pack of hardware is for door window assembly on buses up to '67. Each pack is good for one door window.
Application:Part #: 2615107AWW
Front Disc Brake Kit
Application:Part #: N142268
This is a list of the most common screws you might need..
Application:Part #: 1601153
Replacement Cap, EMPI Logo, Push-On Chrome, 5/8" Inside Height
Application:Part #: 211405519
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:
Engine Deck Lid