Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. We will not ship out your reconditioned Ball Joint Arms until we receive your old arms in good rebuildable condition.
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis and come with the alignment eccentrics. Just pull your old arms off and install the new ones. Ball joints are hard to check, especially if they are marginal. To check your ball joints, grab the top of the tire and try to shake it. If the tire moves and you see movement in the ball joint, it needs replacing.
****Due to a shortage in cores, we are requiring that you send in your core arms before we can send out a reconditioned set.****
We will call you after we have received and reviewed your cores. Most of the cores we receive are rebuildable, however, there are a few that are not able to be rebuilt. We will let you know when we call you whether yours are rebuildable or not, and figure out the next step.
Some reasons why your item might not be accepted:
- Bent
- Bearing surface pitted/destroyed
Bug (Type 1): 66-78
Ghia: 66-74
Race/Off-Road: 66-
No customer reviews for the moment.
Part #: 6863605
This is a console with two or three gauge holes (2 1/16").
Application:Part #: 311501283
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: JC86030
Jaycee Billet Alternator Pulley, Silver
Application:Part #: 361827185A
Rear hatch Alignment Guide, attaches to body, 2 required
Application:Part #: 131609537C
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 1611775B
These stainless steel braided flex lines don't swell like the original rubber hoses and they make the undercarriage look a lot nicer.
Application:Part #: 1119031BHD
Motors with high horsepower and motors that rev fast run the risk of exploding a stock fan.
Application:Part #: 113881177
Camber Detent Springs, Pair
Application:Part #: 1821306ASS
These were originally sold as an accessory by the dealer.
Application:Part #: VDO240855
This T-adapter is needed to hook up the oil pressure and oil temperature gauges.
Application:Part #: T1129026
This meter is used for synchronizing your dual carburetors.
Application:Part #: T1001002
Scissor Jack works on Bugs, Buses, and Ghias. Great for lowered cars
Application:Part #: 153863708
This is a full carpet kit.
Application:Part #: 6903137
This pulley is a lot smaller than a stock pulley.
Application:Part #: N125221
These are some of the more common cotter pins.
Application:
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. We will not ship out your reconditioned Ball Joint Arms until we receive your old arms in good rebuildable condition.