Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Hose End 180 Degree No. 8
Hose End 180 Degree No. 8
Race: All
No customer reviews for the moment.
Part #: 141971017
The electrical harness runs everything on the car.
Application:Part #: 111837291
These handles go on the inside of the front doors to open them.
Application:Part #: 002141701
This shaft holds the throw-out bearing in place.
Application:Part #: 111837361
This is the channel that the front door windows roll up into.
Application:Part #: 133807305A
This is what gets smashed up first in an accident.
Application:Part #: 1198092BCH
92mm Pistons & Cylinders set with a 82mm Stroke CHINA
Application:Part #: 111823345
Hood Stay Bolt (2 required) also used for hood hinge pivot bolt in various years (62-77 standard) (71-72 super)
Application:Part #: 152863404
These carpet kits are to be used with the original rubber floor mats.
Application:Part #: 133823031A
This is a new front hood.
Application:Part #: 211857527B
Oversize Outside Mirror Arm, for use with Round Style Bus Mirrors, Left
Application:Part #: 361847137A
These seals are for the side popout windows.
Application:Part #: 113115611
No, this isn't that distant cousin.
Application:Part #: 113611023B
This hydraulic cylinder feeds all the wheel cylinders.
Application:Part #: 111863705
This is a full carpet kit.
Application:Part #: 113611764C
These are the metal brake lines found throughout the car.
Application:Part #: 1101468
If you have high compression you will need to vent the valve covers into a breather box.
Application:
Hose End 180 Degree No. 8
