Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These panels go in the dash so you can install gauges.
These panels go in the dash so you can install gauges. You'll have to trim some metal behind the panel in order to put your gauges in.
Bug (Type 1): 58-
Race/Off-Road: 58-
No customer reviews for the moment.
Part #: 251419803
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 113863704
This is a full carpet kit.
Application:Part #: 1141027
Kennedy Stage 3 Pressure plate 2600 LB
Application:Part #: 002517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 152701062B
Floor Plate, Right, Convertible
Application:Part #: 6941046A
These are the headlight shells you would use on a Manx style or tube car..
Application:Part #: 241863020
This is a full carpet kit.
Application:Part #: 211953052E
Turn Signal Bulb Holder, RIGHT
Application:Part #: 1101468B
Weld in AL Bung Male #8
Application:Part #: 141971118
The electrical harness runs everything on the car.
Application:Part #: 211857527A
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 113919133
The sending unit registers the fuel level on the gauge.
Application:Part #: 1707199
When you take the front and rear bumper assemblies off to install Euro blade bumpers and guards, you're left with holes in the front and rear aprons.
Application:Part #: 111941119Q
This seal goes in the headlight buckets.
Application:Part #: 1129601BIL
This is a replacement air cleaner for the Weber IDF.
Application:
These panels go in the dash so you can install gauges.
