Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:This is the pedal that works the throttle.
This is the pedal that works the throttle. To remove it, locate the pin that is either mounted to the floor, or (on later model cars) is part of the pedal assembly. You'll need to push the pin out, install the new pedal, and reinstall the pin. We suggest you use some white grease on the pin where it mounts to the pedal to insure that it lasts longer.
Bug (Type 1): 58-66
Type 3: 61-65
Ghia: 58-65
Race/Off-Road: 58-65
No customer reviews for the moment.
Part #: 133853535C
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: 2847103SS
This makes the rear window pop out like the front windows.
Application:Part #: 1601133CH
Porsche Style Lug Nuts, 14mm-1.5, Chrome, Set of 5
Application:Part #: 111837000
Vent Wing Window Installation Kit
Application:Part #: 113611817A
This is the grommet for the reservoir line(s) where they go into the master cylinder.
Application:Part #: 151871409A
Rear Bow Base Seal for Convertible Top
Application:Part #: 1601114
This is just a stock style bolt that is chromed.
Application:Part #: N90106101
Oil Breather Tower O-Ring
Application:Part #: 211707305A
This is what gets smashed up first in an accident.
Application:Part #: 112950506IDF
Throttle Shaft Nut for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 113853555C
These are the correct trim moldings for your running boards.
Application:Part #: 1601153
Replacement Cap, EMPI Logo, Push-On Chrome, 5/8" Inside Height
Application:Part #: 211405691A
Grease Cap, Left, With Speedo Cable hole
Application:Part #: 211611761
Master Cylinder to Pressure Regulator Brake Line
Application:Part #: 111721555A
This cable operates the carburetor(s).
Application:Part #: 113819661G
These are the knobs for the wiper and light switches on the dash.
Application: