Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These panels go in the dash so you can install gauges.
These panels go in the dash so you can install gauges. You'll have to trim some metal behind the panel in order to put your gauges in.
Bug (Type 1): 58-
Race/Off-Road: 58-
No customer reviews for the moment.
Part #: 1129033E
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 255853325
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 211611047FGR
Rear Wheel Brake Cylinder, GERMAN
Application:Part #: 6129650596BL
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 111827329
Engine Deck Lid Spring CHROME
Application:Part #: 022109601
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 1601104A4
Long Wheel Studs, M12-1.5, Set of 4
Application:Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:Part #: 1109336
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 211801574B
Engine Compartment Gusset, Outer, Right
Application:Part #: 311101353ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 251723555
This cable operates the carburetor(s).
Application:Part #: 151857513K
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 1129506IDA
Velocity Stack Covers, for 48IDA/EPC 48 & EPC 51 Carbs, Pair
Application:Part #: 211813273C
Rear valance outer skin
Application:
These panels go in the dash so you can install gauges.
