Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These panels go in the dash so you can install gauges.
These panels go in the dash so you can install gauges. You'll have to trim some metal behind the panel in order to put your gauges in.
Bug (Type 1): 58-
Race/Off-Road: 58-
No customer reviews for the moment.
Part #: 1707302
Stainless Steel Rear Bumper Overrider Set
Application:Part #: 111831421D
These pins are in the door hinges.
Application:Part #: 211955225C
Safari wiper pivots
Application:Part #: 261813300
Truck Corner Louver Section
Application:Part #: 6251004CH
A stinger (depending on your motor combo) makes horsepower at 5K RPM and above.
Application:Part #: 1119526CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 6251002
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 211953519G
This switch controls the wiper motor.
Application:Part #: 151837475
The front door window rolls up and down between these two rubber seals.
Application:Part #: 113611021CGR
Brake Master Cylinder
Application:Part #: 111827329
Engine Deck Lid Spring CHROME
Application:Part #: 211827905
This bracket holds the license plate to the car.
Application:Part #: 113707177W
Front Bumper Bow, US Style
Application:Part #: 151863013
These are the interior panels.
Application:Part #: 1711144BR
These knobs come step threaded so they'll fit all stock 7,10, or 12mm shifters.
Application:
These panels go in the dash so you can install gauges.
