Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are new ball joints pressed into reconditioned stock arms. You will need to send your cores before we will ship out your replacement set.
These are new ball joints pressed into reconditioned arms. They are sold in sets of 4 on an exchange basis and come with the alignment eccentrics. Just pull your old arms off and install the new ones. Ball joints are hard to check, especially if they are marginal. To check your ball joints, grab the top of the tire and try to shake it. If the tire moves and you see movement in the ball joint, it's wasted and needs to be replaced.
Thing: 73-74
No customer reviews for the moment.
Part #: 1601104A4
Long Wheel Studs, M12-1.5, Set of 4
Application:Part #: 111837640B
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 211845124B
Safari Inner Seal (Shim Roll) per foot. Each Front Safari window takes 7 feet or 14 feet per pair.
Application:Part #: 131415811
These are the ball joints on the tie rods.
Application:Part #: 1511221
Torsion Tube End Plates, Inner, Pair
Application:Part #: 133201075G
These are new Brazilian tanks.
Application:Part #: 131611055GR
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 111885657
Rear Seat Locking Hook Spring
Application:Part #: 1109337
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 211405668
Pair of Spindle Nuts
Application:Part #: 1115107
This tray keeps the oil in the engine case from moving around too much, reducing oil starvation.
Application:Part #: 1821306ASS
These were originally sold as an accessory by the dealer.
Application:Part #: JC21900
Jaycee Tapered Ring Compressor 90.5mm
Application:Part #: 141953161AAM
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 113863708
This is a full carpet kit.
Application:
These are new ball joints pressed into reconditioned stock arms. You will need to send your cores before we will ship out your replacement set.
