Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These ball joints have more travel in them than stock ball joints.
These ball joints have more travel in them than stock ball joints. If you are lowering your beam with adjusters or "slamming" your car, you need lowered ball joints.
No customer reviews for the moment.
Part #: N125321
These are some of the more common cotter pins.
Application:Part #: 251405645B
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 1601056
Empi Dish, Silver, 5x205, 5.5"x15"
Application:Part #: 6501149108K
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 2711098PL
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: 211817758
This is the flat seal for the air duct on buses 1955-1967.
Application:Part #: 1129702
EMPI EPC 34 or ICT Manifold kit for Dual Port Type 1 Engines
Application:Part #: 211829193E
It seals the rear cargo door and has to be glued in.
Application:Part #: 133807331
Left rear bumper shock
Application:Part #: 251845341CL
These window seals are on buses 1968 on.
Application:Part #: ECP25B
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 1101344
36 HP Barrel Shims .040 (4)
Application:Part #: 7105401CU
We’ve teamed up with Neil & Parks to create a new Rod & Cap option for anyone running a Pauter “Big Block VW”. The Aluminum rod is made by MGP, and we are custom cutting the rod and cap to achieve a self-centering “cracking” application. These caps clear everything in a Pauter block.
Application:Part #: 151863120
These are the interior panels.
Application:Part #: 1251262C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:
These ball joints have more travel in them than stock ball joints.
