Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a brass tee for dual carbs.
This is a brass tee for dual carbs. We recommend you use a brass tee instead of a plastic one.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1129710
EMPI Single HPMX/IDF Manifold for Type 1 engines
Application:Part #: 1129601EL6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1129701
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1127100
Hose Clamp for 5mm hose
Application:Part #: 111198551
This kit allows you to rebuild your fuel pump.
Application:Part #: 1129610
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 113129651
This rubber hose goes from the oil breather to the stock air cleaner..
Application:Part #: VCP12
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 311133263
Fuel injection seal large
Application:Part #: 1129700
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 113129717LRG
Dual Port Gaskets without Pin Holes
Application:Part #: 1127101
Hose Clamp For 7mm Hose
Application:Part #: 1129609EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 113129710D
Dual Port Manifold End Casting - Right
Application:Part #: 043129617A
Air Intake Boot for Fuel Injection
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:
This is a brass tee for dual carbs.
