Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This seal goes between the handle and the body.
This seal goes between the handle and the body. The door handle must be romoved to replace them.
Type 3: 62-67
No customer reviews for the moment.
Part #: 1115105E
Oil Pick Up Tube Cut To Length
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 6501149100B
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 111115131B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1411300AN
Narrowed Sway Bar for Narrowed, Adjustable Front Beam, Link Pin
Application:Part #: 1701259A
Delrin shift rod bushing
Application:Part #: 1601050
Fuchs Chrome, 5x130 bolt Pattern, 4.5"x15"
Application:Part #: 1945246
Blue dots were popular back in the 50's.
Application:Part #: 1615125B
Right Rear Caliper, 4x130, with Emergency Brake, Swing Axle
Application:Part #: 61316
These stock pumps pump fuel into the carburetor.
Application:Part #: 111801045L
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 025101065C
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 62010718E5
End Fill 8x24" Polished Stainless Steel Gas Tank
Application:Part #: 111035313
Trim Plate, Radio To Dash
Application:Part #: 111701555B
Tunnel Inspection cover
Application:Part #: 141971907
Grommet for High/Low Beam Wiring
Application:
This seal goes between the handle and the body.
