Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a rubber plug that is used to plug off vacuum.
This is a rubber plug that is used to plug off vacuum. We use the 12mm on stock dog house fan shrouds, to block off where the hose would go to the charcoal canister. It can also be used if you want to block off where the vacuum line came off the stock intake manifold for the power assist on buses. The smaller plugs are usally used on the carb to plug off unused vacuum ports.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1129601HD6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:Part #: 043133247
Air Distribution Fitting
Application:Part #: 1127108ALF
This is stainless steel braided fuel line.
Application:Part #: 1129700
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:Part #: 111127531A
6mm Fuel Line Ferrule
Application:Part #: 1129701W
EMPI Deluxe Dual HPMX or IDF Manifold kit
Application:Part #: 1129602
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129601
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1127109ALM
This is stainless steel braided fuel line.
Application:Part #: 111127511A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1127110
This is a brass tee for dual carbs.
Application:Part #: 1129616
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.
Application:Part #: 113127303
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:
This is a rubber plug that is used to plug off vacuum.