Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This seal goes between the handle and the body.
This seal goes between the handle and the body. The door handle must be romoved to replace them.
Bug (Type 1): 66-67
Race/Off-Road: 66-67
No customer reviews for the moment.
Part #: 1109400
This kit eliminates the clips and spring washers in a rocker shaft set up.
Application:Part #: 111885371
This is the padding that sits on top of the springs of the seat.
Application:Part #: 151883410
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 211415585
Upper Steering Column Bearing with Replacement Spring
Application:Part #: 6801105
Chromoly Seat Mounting Tab, radiused for 1 1/2" tubing
Application:Part #: 241863019
This is a full carpet kit.
Application:Part #: 6823501
These fasteners take some time to put in, but they're worth the effort.
Application:Part #: 1117102ALF
These fittings are used for the stainless steel hose.
Application:Part #: 113853559A
These are the clips that hold the various chrome moldings on.
Application:Part #: 131853535
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: 6801243
Billet Bracket Undrilled for 1.5" Tubing
Application:Part #: 1707103
This bumper is perfect for 1968-73 cars when the turn signals have been shaved off the front fenders.
Application:Part #: 6971001
This is a cheap way to wire an off road car, but we don't suggest using this harness on a Baja Bug.
Application:Part #: 6301264
These mounts should only be used on cars that are not daily drivers.
Application:Part #: 11310140105
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: F1610
These are the glues and oils we use..
Application:
This seal goes between the handle and the body.