Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The door lock mechanism holds the door closed.
The door lock mechanism holds the door closed. To remove the old mechanism you'll need to take the door panel off and basically gut the inside. Peel the door rubber from the door jam and remove the Phillips screw(s) that hold the handle in. Look for the three Phillips screws that hold the mechanism in and remove them. Now remove the clip that holds the inside handle rod to the mechanism. Next, take out the window (yeah, I know it's a pain). Then look at the metal channel that the felt sits in. Peel the felt up a little at the bottom and you will see a 10mm headed bolt that has to be removed. Remove the bolt and push up on the channel and it will come out. At this point, fish the lock mechanism out. To install the new mechanism, go in the reverse order.
Bug (Type 1): 60-64
Race/Off-Road: 60-64
No customer reviews for the moment.
Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:Part #: 111863013
These are the interior panels.
Application:Part #: 113863111
These are the interior panels.
Application:Part #: 151857623
This is a strap, not a handle.
Application:Part #: 113837419
Rear Felt Guide Rail, Each
Application:Part #: N142161
Convertible Top Latch Screw (4 Required)
Application:Part #: JC21220
Jaycee Billet Breather Stand, Black
Application:Part #: 1115183RD
This plate is made out of a solid piece of aluminum. Red
Application:Part #: 2847102CU
This makes the rear window pop out like the front windows.
Application:Bus (Type 2): 55-63
Part #: 113201157
Fuel Breather "T"
Application:Part #: 6711149
This box is made so you can weld it to a piece of 1 1/2" tubing and mount it to your shifter.
Application:Part #: 211301215
This is the front of the transmission that houses the shift lever.
Application:Part #: 1411108
2" Narrowed Leaves for Ball Joint, 1 Set (2 sets required)
Application:Part #: 221845305A
New replacement glass for pop out window frames.
Application:Part #: 211721351A
This pin goes on the front end of the clutch cable and should be replaced when you replace the cable.
Application:Part #: 211501357
Torque plate
Application:
The door lock mechanism holds the door closed.
