Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
These locks keep the vent wing closed, therefore a must, but they're a pain to replace. Start by removing the glass and rubber. Use a 1/8" drill and drill out the original rivets. Next, remove whatever is left of the old lock and install the new lock. Using 1/8" pop rivets, install the head of the lock from the frame side. With a hammer and dolly, very carefully flatten what's left of the rivet on the latch side. Now replace the glass and rubber.
Bug (Type 1): 68-79
Race/Off-Road: 68-79
No customer reviews for the moment.
Part #: 025198465BR
Main Bearing Set .020 - STD - STD
Application:Part #: 1109460
These shims are used under the rockers to set the geometry.
Application:Part #: 113955425BBR
Wiper Blades - Brazilian, each
Application:Part #: 111813705D
This seal goes between the body and the engine.
Application:Part #: 021129620
This is a replacement paper element for the stock air cleaner..
Application:Part #: 311953121A
This is the lens and seal for the light that shines on the license plate.
Application:Part #: 151837626B
Vent wing seals on the front doors keep out the elements.
Application:Part #: 211955409B
The arms extend from the shaft to hold the wiper blades, very rarely do they fail..
Application:Part #: 6721356D
Slave Cylinder Trans Bracket Billet for Mendeola Transmissions
Application:Part #: 2615107A
This kit allows you way to bolt on disc brakes to the front of your king and link pin front end. Bolt Pattern is 5x112
Application:Part #: 211827375
Engine Deck Lid Prop Spring
Application:Part #: 6857632
Bolt on Billet Grab Handle with 5/16"-18 threads
Application:Part #: 113819719A
These are the vents that clip into the dash.
Application:Part #: 025109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 1119025CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 311198169A
Rings on the pistons are there to eliminate "blow-by".
Application:
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
