Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The main reason to replace these clamps is because you've destroyed the old ones getting them off.
The main reason to replace these clamps is because you've destroyed the old ones getting them off. To put the new ones on, use a large pair of channel lock pliers to squeeze the band together and then slide the clip on. Once the clip is all the way on, bend the tab down. It is harder than it sounds.
No customer reviews for the moment.
Part #: 151853325C
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 021119249E
Aluminum Ignition Timing Scale
Application:Part #: 111711629B
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: JC86080
Jaycee Billet 6" Crank Pulley for Offroad Cars, Red
Application:Part #: 11310140105
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 021198175A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 311405371WG
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. We will not ship out your reconditioned Ball Joint Arms until we receive your old arms in good rebuildable condition.
Application:Part #: 151847352C
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 113251263B
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 113863527A
These two nuts hold the cover on that goes over the wiring in the trunk.
Application:Part #: 1117111
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: ECX25B
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 113301189F
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 6301264
These mounts should only be used on cars that are not daily drivers.
Application:Part #: 6415615
This unit is used when you want to take the steering wheel off in a hurry.
Application:Part #: N144111
Some of the most common studs you might need.
Application:
The main reason to replace these clamps is because you've destroyed the old ones getting them off.