Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
These locks keep the vent wing closed, therefore a must, but they're a pain to replace. Start by removing the glass and rubber. Use a 1/8" drill and drill out the original rivets. Next, remove whatever is left of the old lock and install the new lock. Using 1/8" pop rivets, install the head of the lock from the frame side. With a hammer and dolly, very carefully flatten what's left of the rivet on the latch side. Now replace the glass and rubber.
Bug (Type 1): left,56-64, Conv.,56-64
Race/Off-Road: left,56-64
No customer reviews for the moment.
Part #: N0124342
These are some of the most common clips you will need when putting your car back together..
Application:Part #: 151801132B
These are the replacement rails for convertibles.
Application:Part #: 113853111C
Door Panel Molding Set 5 pcs
Application:Part #: 113109301D
These rods link the cam to the valves. These are very costly so please call for good used ones.
Application:Part #: 113609163
You will find this little plug in the backside of the rear backing plates on cars 1968 and later.
Application:Part #: 211813355G
Rear Lower Corner, Left, 250mm (9.8") high
Application:Part #: 1198160
These rings are cast iron.
Application:Part #: 111209139
Sealing Ring, Seals Copper Screen to Fuel Valve
Application:Part #: 070199231A
Outer engine mount
Application:Part #: 6401300A
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
Application:Part #: 211415417
This is a rubber "donut" that connects the steering shaft to the steering box.
Application:Part #: 211707135D
Front Bumper Bracket, Left
Application:Part #: 2847521C
This seal goes on the body of the bus, that the safari window closes against.
Application:Part #: 211971112
Complete Wiring Harness
Application:Part #: 3251001
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.