Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This assembly comes with the bulb holder and lens.
This assembly comes with the bulb holder and lens. It does not come with bulbs.
Vanagon: 80-92
No customer reviews for the moment.
Part #: 1615108
This kit allows you to run disc brakes in the rear.
Application:Part #: 211609139B
Front Brake Backing Plate, fits either side
Application:Part #: 111863711
This is a full carpet kit.
Application:Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 361845341BCL
Back Quarter Windows Non Pop-Out Seals, Cal Look, Set of 2
Application:Part #: 111105297
It's really a bolt, but that's what everybody calls it.
Application:Part #: 6857050A
This panel goes across the whole dash.
Application:Part #: 113953173
Turn Signal Assembly screws (Set of 4)
Application:Part #: 141945557
This square reflector sits below the tail light.
Application:Part #: 1905530VAP
Pertronix Electric Ignition for Vacuum Advance Distributor
Application:Part #: 1405371WG
These are new lowered ball joints pressed into reconditioned arms. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 311405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.
Application:Part #: 211813243
These are the panels on the side of the engine that holds the seal for the engine.
Application:Part #: 211405670
Spindle Nut, Right
Application:Part #: 6905811
If you want a keyed ignition switch for you buggy or tube car, here you go.
Application:Part #: 6511243
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 111813161
Engine Bay Shelf, Left
Application:
This assembly comes with the bulb holder and lens.