Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need. Always use teflon tape on your fittings. Whatever you do, don't "muscle" them in, especially the 90 degree fitting on the case. We like to use quick fittings by the oil pump and case. If you use quick fittings, you won't have to cut hoses when you pull the engine.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111115131B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 111115451
This rubber collar goes around the dump tube that comes from the generator stand.
Application:Part #: 1115610
Chrome dipsticks come in different lengths and styles..
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 1117008
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 1115464
This air filter is made to protect the crankcase.
Application:Part #: 1115450BC
Replacement Oil Cap Billet Polished
Application:Part #: 040101149
Oil pick up Pipe
Application:Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 1115141BL
This oil pump cover comes with a threaded boss.
Application:Part #: 1115449RD
Replacement Oil Cap Billet Red
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: JC21030
Jaycee Mag-Plate, 6 Bolt, Blue
Application:Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
