Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These shims are used with the Solid Shaft Rocker Kit.
These shims are used with the Solid Shaft Rocker Kit. Even though the rocker kit comes with shims, you many need more. When you run solid shafts, it's very important they are shimmed correctly.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 111109301A
These rods link the cam to the valves.
Application:Part #: 113109612
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 1109302
These push rods are made out of chromoly steel and do not expand at the same rate as aluminum.
Application:Part #: 113109309C
These ride against the cam. Sold each. You will need 8 to do an engine
Application:Part #: 113109623C
These springs return the valves back to their seats.
Application:Part #: 1109603
Stainless steel valves are used in the big valve heads.
Application:Part #: 1109651
We have had good luck with stock keepers on single springs.
Application:Part #: JC91020
Jaycee Leak proof Pushrod Tubes, Black
Application:Part #: 111109345
Push Rod tube seal for 36 HP
Application:Part #: 113109601B
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 1109623
These are single heavy duty valve springs which are used on engines with Engle 110 or larger cams.
Application:Part #: 113109301D
These rods link the cam to the valves. These are very costly so please call for good used ones.
Application:Part #: 111198541GR
The cam rides in these bearings.
Application:Part #: JC91030
Jaycee Leak proof Pushrod Tubes, Blue
Application:Part #: 111109611A
Exhaust Valve 36 HP
Application:Part #: 113109021GBR
We've had no luck with regrinds, therefore we sell only new camshafts.
Application:
These shims are used with the Solid Shaft Rocker Kit.
