Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This assembly comes with the bulb holder and lens.
This assembly comes with the bulb holder and lens. It does not come with bulbs.
Bus (Type 2): 72-79
No customer reviews for the moment.
Part #: 211813356HWW
Rear Lower Corner, Right, from bottom to beltline
Application:Part #: 2847431
Side Weld in Tabs For Rear Safari
Application:Bus (Type 2); 55-79
Part #: 117875575
This is the cover (top) for 57-63 sunroof bugs.
Application:Part #: SRHT6V
A 6volt gear that fits the high torque starter.
Application:Part #: 113881275B
Spring for Seat Back Locking Hook, Pair
Application:Part #: 1903184
Nut for Billet Pulley Only
Application:Part #: 111837209A
This seal goes between the handle and the body.
Application:Part #: 4881404CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 1251210
These are two of the different types of exhaust nuts.
Application:Part #: 111957375A
This seal goes around the speedometer.
Application:Part #: 251698003
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 141945557
This square reflector sits below the tail light.
Application:Part #: 1251161
A stinger (depending on your motor combo) makes horsepower at 5K RPM and above.
Application:Part #: T1129028
Some carb combo's are tricky to sync, like kadrons that have a stud sticking up.
Application:Part #: 1129720
Intake Gasket for CB's Competition Eliminator Cylinder Heads or super flow.
Application:
This assembly comes with the bulb holder and lens.
