Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
14-16 Gauge Female Spade w/ Male Spade Piggy Back
14-16 Gauge Female Spade w/ Male Spade Piggy Back
No customer reviews for the moment.
Part #: 111827581
This is the seal that goes under the deck lid handle..
Application:Part #: 111701573A
Inspection Cover
Application:Part #: 6119024
This is a billet mount made to relocate your coil.
Application:Part #: 113847139
This is the plate the cover goes over
Application:Part #: 111115131B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1903109BOPO
Billet Pulley Outer Half Polished
Application:Part #: 111863107
Rubber Firewall Mat, Black
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 151871049A
This is what you see whey you look up at the header bow.
Application:Part #: 111701061MHD
This is one entire half of the pan.
Application:Part #: 2498211A
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as...
Application:Part #: 113119585
These seals go over the stock H pipes where they come through the front pulley tin.
Application:Part #: 111899113
Body Pad (2), Lower, Body to Front Beam
Application:Part #: 6801111
These tabs are used for mounting just about anything to tubing..
Application:Part #: 113109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:
14-16 Gauge Female Spade w/ Male Spade Piggy Back
