Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This assembly comes with the bulb holder and lens.
This assembly comes with the bulb holder and lens. It does not come with bulbs.
Bus (Type 2): 62-71
No customer reviews for the moment.
Part #: 113957809
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 1109603
Stainless steel valves are used in the big valve heads.
Application:Part #: 6821509HD
These bars mount where your running boards where.
Application:Part #: 6415061B
It's super compact, light weight and easy to mount on Buggies or Sand rails.
Application:Part #: 111115107AKS
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 211837205D
These are the front door handles.
Application:Part #: N144691
Some of the most common studs you might need.
Application:Part #: 6501229BE
These are hardened aircraft quality CV joint bolts.
Application:Part #: 6957351B
These lights let you know what's on or happening with various parts of your car..
Application:Part #: 1129601EL6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 311945223R
Red/White Tail Light Lens, Both Sides
Application:Part #: 6415065
It's super compact, light weight and easy to mount on Buggies or Sand rails.
Application:Part #: 1101461KIT
This kit has the correct studs for a dual port engine to hold the heads on. 10mm
Application:Part #: 211801051D
This area tends to rust.
Application:Part #: 113415801
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:
This assembly comes with the bulb holder and lens.