Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
It's really a bolt, but that's what everybody calls it.
It's really a bolt, but that's what everybody calls it. This bolt holds the flywheel on. If you are using an old one make sure the needle bearings in the pilot bearing are still in the end and that it's not rusted. Note: This bolt should be put on with a torque wrench and not a breaker bar with someone jumping off the roof. Impact guns are out too! Torque the bolt to 250 ft. lb., anything less and it will come loose. Anything more and you run the risk of cracking the bolt and having the flywheel fall off.
Bug (Type 1): 64-79
Bus (Type 2): 72-79
Vanagon: 80-91
Type 3: 62-73
Ghia: 61-74
Thing: 73-74
Race/Off-Road: 64-79
No customer reviews for the moment.
Part #: 111105245
This seal goes behind the flywheel.
Application:Part #: 311105401BRC
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 1903108RD
EMPI Serpentine Belt System Red
Application:Part #: 111105713A
Rod Bearings .20
Application:Part #: 311105295A
This seal goes in the flywheel.
Application:Part #: 113105219
Crankshaft Spacer Ring
Application:Part #: 111105285
Flywheel Shim 25-36HP, .32mm (0.0125")
Application:Part #: 111105235A
These are the shims that set the endplay of the distributor drive gear.
Application:Part #: 111198475OS2
Main Bearing Set 1200-1600
Application:Part #: 113105271BCO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 311105273ACO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 111105263A
The bolt that holds the crankshaft pulley on.
Application:Part #: 113105209
This is a steel gear that goes on the crank to turn the cam.
Application:Part #: 111105213
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
Application:Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 1105219
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
Application:
It's really a bolt, but that's what everybody calls it.