Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This bushing wraps around the front shift rod.
This bushing wraps around the front shift rod. If your shifter is sloppy this is usually the reason. On a Bus before you start ripping apart the shifter, crawl under the front and find the shift rod, follow it to the shifter and find the hanger and bushing. Push the rod up and down, if it moves it's bad. On a Bug or a Type 3, take out the shifter and use a pair of pliers and pull up and down on the shift rod. If it moves it is bad. When installing the new one, use white grease on the rod where it rides in the bushing. On a Bus the rear bushings can only be replaced if the transmission has been removed.
Bus (Type 2): 74-79
No customer reviews for the moment.
Part #: 151971112
The electrical harness runs everything on the car.
Application:Part #: 1885402CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 1415811
This kit allows you to drill out your tie rod end holes and flip your tie rod end over, giving you a better tie rod angle.
Application:Part #: 111863412
This carpets the area behind the rear seat.
Application:Part #: 111885661
Rear Seat Release Tube (2)
Application:Part #: 1821531SL
There are two styles of stainless steel running boards, smooth and louvered.
Application:Part #: 211298009A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1837200
This guard goes underneath the door handle to keep your fingernails from scratching the paint.
Application:Part #: 133711717B
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 112950503IDA
Fast Idle Screw and Spring
Application:Part #: 131141719HD
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: 1115465
This air filter is made to protect the crankcase.
Application:Part #: 1701259A
Delrin shift rod bushing
Application:Part #: 113411313A
Sway Bar Bushing, Front
Application:Part #: 113853111B
Door Panel Molding Set 5 pcs
Application:Part #: F1130P
These are the glues and oils we use..
Application:
This bushing wraps around the front shift rod.