Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Engle Cams TCS20 (Turbo)
Engle Cams TCS20 (Turbo) Intake 294 degree Duration, .397" Cam Lift, 112 degree Lobe Center, Exhaust 284 degree Duration, .391" Cam Lift, 112 degree Lobe Center
Race: All
No customer reviews for the moment.
Part #: 315853322A
Outside Door Scraper Right
Application:Part #: 131415811
These are the ball joints on the tie rods.
Application:Part #: 211837625
Vent wing seals on the front doors keep out the elements.
Application:Part #: 111805591C
This is the front skin on the Bug.
Application:Part #: 141853335
The front door window rolls up and down between these two rubber seals.
Application:Part #: 113415660A
Turn Signal Cancelling Ring
Application:Part #: 6857511B
These are nice looking mirrors for your off road car.
Application:Part #: 211415617
This rubber seal goes around the steering column to seal off air coming through the floor.
Application:Part #: 111831421DO2
These pins are in the door hinges. They are a real pain to get out, but we've found an air hammer works the best. Sometimes that doesn't even work, so have a case of penetrating oil on hand. It's better to repair the door hinges before you paint the car. The plug is a good idea to have as well, they easily plug into the top of the hinge pin.
Application:Part #: 1881031
We really like the style and comfort that these seats provide.
Application:Part #: 211498041BR
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:Part #: 111899119B
Body Pad (2), Rear Shock Tower
Application:Part #: 113867506
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 111837235BK
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 113707391
This tubular bracket goes on American style bumpers to support the upper tubing of the bumper..
Application:
Engle Cams TCS20 (Turbo)
