Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need. Always use teflon tape on your fittings. Whatever you do, don't "muscle" them in, especially the 90 degree fitting on the case. We like to use quick fittings by the oil pump and case. If you use quick fittings, you won't have to cut hoses when you pull the engine.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1198094BCH
94mm Pistons & Cylinders set with a 82mm Stroke CHINA
Application:Part #: 211405691B
Bearing Grease Cap, Left Side with Hole for Speedo Cable
Application:Part #: 211955985C
Washer Jet, fits both sides, each
Application:Part #: 113857551LBK
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 1827705
Just like the front mexican style seal, this seal clips to the deck lid instead of the body..
Application:Part #: 1115351OR
O-Ring Kit for Spin on Filter (System One)
Application:Part #: 221845325B
Seals the side popout windows on buses up to 1967.
Application:Part #: 111405273
These are the rubber snubbers that are in between the front torsion bar arms.
Application:Part #: 111837229C
These springs go behind the door panels to put tension on the door handle buffers.
Application:Part #: 113845521ACL
This seal is for the rear window.
Application:Part #: 043251051C
This is the exhaust silencer.
Application:Part #: 111198541HD
The cam rides in these bearings.
Application:Part #: 6615104A
Front Rotor for Disc brake setup, 5/205 bolt pattern, 12x1.5mm threads -1965
Application:Part #: 211611905
Brake Servo
Application:Part #: 231070708
This seal goes around just the pop top portion of a camper..
Application:Part #: 151871349C
This sels the leading edge of the top to the front window frame..
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.