Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:
This is the exhaust silencer.
This is the exhaust silencer. If you want a stock muffler, we prefer the German made ones. They fit better and last longer. Brazilian mufflers can't compare in quality, but they're available and cheaper. Note: Once you have installed your muffler, drive the car for a day and retighten the nuts, bolts and clamps, as they will loosen up.
Bus (Type 2): Diesel
No customer reviews for the moment.
Part #: 071251185A
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 021251235
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 2847104CU
This makes the rear window pop out like the front windows.
Application:Part #: 113127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 111881795A
Seat Paperboard Backing, Set of 2
Application:Part #: 113837239BBK
This is the trim piece that goes around the inside front door handle.
Application:Part #: 141881406
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 1198094B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 6501331H
Porsche Style 930 CV Joint 108mm OD, .875" Balls, CHINA
Application:Part #: 211857513A
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 6801235
Billet Bracket for 3/16" Brake Line, for 1 3/4" Tubing
Application:Part #: 1511221
Torsion Tube End Plates, Inner, Pair
Application:Part #: N141301
Screw for Inner Door handle to Mechanism
Application:Part #: 6301150
Type 2 Transmission Mount Kit, Weld in Front mount Brackets For Tube Chassis Only not Stock Framehorns
Application:Part #: 111405627
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 113857117B
This plastic ring goes around the dash for the glove box.
Application:Part #: 1127108ALF
This is stainless steel braided fuel line.
Application:Part #: 111857513K
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:
This is the exhaust silencer.
