Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Front torsion springs
These are flat leaf springs that stack together that is in your front end. There is one set in the top tube and another set in the bottom tube. You will need two sets. They are sold in sets for the top or the bottom not both.
No customer reviews for the moment.
Part #: 143845211BL
These seals slide into a channel sealing the front door window glass on a Ghia.
Application:Part #: 021105285
Endplay Shim .34mm
Application:Part #: 1401300A
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
Application:Part #: 113863711
This is a full carpet kit.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 039101061D
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 6823505
These fasteners take some time to put in, but they're worth the effort. Wing Nut
Application:Part #: 221863010
These are the interior panels.
Application:Part #: 113611015BH
This hydraulic cylinder feeds all the wheel cylinders.
Application:Part #: 133853535CSL
Body molding kit stainless steel
Application:Part #: 111899123A
This is a little rubber pad that goes on the front beam where you attach the beam to the body.
Application:Part #: 111801202AD
Rear Crossmember Right
Application:Part #: 211845121
This seal goes around the front window.
Application:Part #: 6517283091
These conversion flanges will allow you to run bigger stronger Bus or 930 CV joints..
Application:Part #: 131711741A
Heater Control Knob, Red
Application:Part #: 113951501B
Horn Button, Castle on Face
Application: