Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This T-adapter is needed to hook up the oil pressure and oil temperature gauges.
This T-adapter is needed to hook up the oil pressure and oil temperature gauges. It screws into the side of the engine case where your old stock oil pressure sending unit was. Do not over tighten the adapter. The oil pressure sending unit will face the driver's side fender and the oil temperature will face the rear bumper.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 211611723A
These are the metal brake lines found throughout the car.
Application:Part #: 070115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: N117011
Sunroof Cover and Headliner Finishing Washer
Application:Part #: 1511210
Spring Plate Conversion Kit
Application:Part #: 211953215C
This relay makes the turn signal flash.
Application:Part #: 1141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 141871030
This is the outer skin on your convertible.
Application:Part #: 211809203
"A" Post Inner Repair Section, Left
Application:Part #: 311109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 111998162
The wiper arms are connected to these shafts.
Application:Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 1119525CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 6857648
Billet Side Steps, Long (14" OAL), 1/2" x 13 threads, Each
Application:Part #: 6945203A
These mini lights are ideal for off-road cars.
Application:Part #: 443253115B
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 151863122
These are the interior panels.
Application:
This T-adapter is needed to hook up the oil pressure and oil temperature gauges.
