Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock. On swing axle diffs you have two choices; threaded or snap ring. The threaded diffs hold the axles better then the snap ring, however you have to pull the whole center section of the trans apart to replace an axle. Diffs do not come with the extra spider gears you need, so you will have to get those as well. Last but not least, you have to know what your doing to set one of these up, and we suggest you take it to someone who has experince in setting up ring and pinions. We highly reccomend these diffs for those of you with big motors.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia (Type 4): All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1301050
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 111301289
Nose Cone Boot
Application:Part #: 113301263FA
Rear Transmission Mount, Left or Right good quality sold each
Application:Part #: N122391
Transmission Cradle Bolt Washer
Application:Part #: 113311123A
This is the main culprit of a noisy transmission.
Application:Part #: 1301263
These mounts made of urethane never wear-out.
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 001301083B
This seal keeps the fluid in the converter.
Application:Part #: 113311541C
Transmission Shift Lever (Hockey Stick)
Application:Part #: 1301265L
Urethane Front Transmission mount with Hardware
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 211301297
Front Transmission Mount
Application:Part #: 113517191
Swing Axle Fulcrum Plates
Application:Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 1517122
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application: