Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These bearings go in the drum or rotor hub to allow them to spin.
These bearings go in the drum or rotor hub to allow them to spin. Make sure you pack the bearings well before installing. When installing outer races make sure you do not scar the surface the bearing rides on. It is a good idea to buy seals at this time. Note: Tightening of wheel bearings is explained under FRONT DRUM & ROTOR.
No customer reviews for the moment.
Part #: 113953021F
Semiphore, 12 Volts, New, Each
Application:Part #: 251615108
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 151871199A
This is the pad between the top material and the headliner.
Application:Part #: 1517120
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 111823651
This lever is found in the glove box.
Application:Part #: 113919049D
The sending unit registers the fuel level on the gauge.
Application:Part #: 133971020
The electrical harness runs everything on the car.
Application:Part #: 113611053B
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 211857513H
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 1401061B
2" Narrowed Beam with Ratchet Style Adjusters, Ball Joint
Application:Part #: 143837472
Outside Window Scraper W/molding Right
Application:KG; 72-74
Part #: 1707135BCH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: F1380
These are the glues and oils we use..
Application:Part #: 113853555SL
Running Board Molding, Stainless
Application:Part #: 1101440
This is a shim that is used between the head and barrel.
Application:
These bearings go in the drum or rotor hub to allow them to spin.
