Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a crank pulley for an upright motor.
This is a crank pulley for an upright motor. The pulleys are marked in degrees to assist in timing and valve adjustment. Besides that, they just look cool! Unless you like spending money on rebuilding your motor, NEVER, EVER use a power pulley on your Bug unless this is a drag car or all out race motor. Power pulleys turn the fan slower, which means less cooling and more heat. Neither are good for an air-cooled daily driver motor. These pulleys fit upright motors only.
Be Careful when cleaning this pulley the numbers are "silk screened" on the pulley and easily removed by any cleaning solution (carb cleaner, engine degreaser, etc.)
No customer reviews for the moment.
Part #: 111105263A
The bolt that holds the crankshaft pulley on.
Application:Part #: 1105169F
Forged 69mm Counter Weighted Crankshaft
Application:Part #: 111903137S
Replacement Belt for Serpentine System
Application:Part #: 111105283
Flywheel Shim 25-36HP, .30mm (0.012")
Application:Part #: 111105701A
These are the shells that go in the rods and ride on the crank.
Application:Part #: 111105245
This seal goes behind the flywheel.
Application:Part #: 311105401BRC
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 1105401A
These connecting rods are longer than stock.
Application:Part #: 111105285
Flywheel Shim 25-36HP, .32mm (0.0125")
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105297
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
Application:Part #: 113105219
Crankshaft Spacer Ring
Application:Part #: 111105297
It's really a bolt, but that's what everybody calls it.
Application:Part #: 111105707A
Rod Bearings .10
Application:Part #: 113105231B
This gear matches up with the brass gear that is on the crank.
Application:Part #: 111198511OS2
Main Bearing Set 1200-1600
Application:
This is a crank pulley for an upright motor.
