Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
For convertibles, this is the upper pin that the vent wing pivots on.
For convertibles, this is the upper pin that the vent wing pivots on. Be careful not to crack the glass. Use some white grease on the pivot bushing to make it last longer.
Bug (Type 1): 65-72
No customer reviews for the moment.
Part #: 1101476BWG
Wolfgang Billet Valve Covers There are a few companys making billet valve covers and I have used a few of them and liked them. But we decided to make our own with a few differences.
Application:Part #: 111809085CE
Rear Shock Tower Area
Application:Part #: 213707666
Splash Pan to Bumper Bracket, Rubber Pad, Set
Application:Part #: 002141701A
This shaft holds the throw-out bearing in place.
Application:Part #: 211809163A
Rear Wheel Well Arch, Left
Application:Part #: 113845121JAM
This seal goes around the front window.
Application:Part #: 1105255BK
This is a very nice pulley; the numbers are etched in and do not wear off.
Application:Part #: 113845521AAM
This seal is for the rear window.
Application:Part #: 133807197
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 113837639A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 1109310
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
Application:Part #: 141837240
This seal goes between the handle and the body.
Application:Part #: 6119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: N102107
Decklid to Hinge Bolt for bugs
Application:Part #: 6881410AYL
These seats are better than the fiberglass, but still no where near as good as beard seats.
Application:Part #: 043255106G
These are your source of heat.
Application:
For convertibles, this is the upper pin that the vent wing pivots on.
