Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This little box tells the generator what to do.
This little box tells the generator what to do. To test the regulator, use a volt meter on the battery. The voltage should read 12v to 12.5v. Now start the car and rev up the motor and read the meter. The meter should now read 13.5v to 14v. If the meter doesn't move, either the regulator or the generator is bad. If you see the volt meter go backwards then the generator needs to be polarized.
Bus (Type 2): 80-83
No customer reviews for the moment.
Part #: JC86020
Jaycee Billet Alternator Pulley, Red
Application:Part #: JC86000
Jaycee Billet Alternator Pulley, Blue
Application:Part #: SR15HT
This is what starts the car.
Application:Part #: 211903183
This is the bell shaped spacer that hold the outer half of the generator pulley on.
Application:Part #: AL27XCO
This unit supplies the battery with voltage.
Application:Part #: GR15NC
Generators supply the battery with voltage.
Application:Part #: GR17XCO
Generators supply the battery with voltage.
Application:Part #: 1903531
On all upright motor, this plastic cover goes over the top opening of the generator to keep dirt out.
Application:Part #: GR15XCO
Core Charge Generators supply the battery with voltage. Rebuilt
Application:Part #: 1903137
Replacement belt for Serpentine belt driven Alternator or Generator
Application:Bug (Type 1); 40-1600
Bus (Type 2); 40-1600
KG; 40-1600
Thing; All
Offroad; 40-1600
Part #: 1903109BOPO
Billet Pulley Outer Half Polished
Application:Part #: 111903137B
This is the belt that turns the generator.
Application:Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 113971901A
This boot goes over the wire and the terminal of the generator or alternator.
Application:Part #: SR17XCO
This is what starts the car.
Application:Part #: 111903515A
These are the bearings and brushes for your generator.
Application:
This little box tells the generator what to do.