Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is what starts the car.
This is what starts the car. It usually quits the furthest place from home. To bench test a starter is tough, as they can work but are weak. In other words, it will work on the bench, but as soon as it has the drag of the engine on it, it won't. The way we test starters is in the car with a remote starter button (a push button with two long wires). Disconnect the battery. Hook up one of the wires to the big post that the battery cable is hooked to and the other wire to where the push-on wire is located. Now connect the battery back up and make sure the E-brake is on and the car is out of gear. Push the remote starter button. If the engine turns over the starter is good, and if it doesn't, it's bad. If you find the starter works with the remote starter but not with the key, call us. You might need a hard start relay or a new electrical part in the ignition switch. Some starters are sold on exchange.
Bus (Type 2): All
No customer reviews for the moment.
Part #: 30091
This little box tells the generator what to do.
Application:Part #: 021903137A
This is the belt that turns the generator.
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: 1903109CH
This is a stock generator pulley that has been chromed.
Application:Part #: 1903141B
This strap is much stronger than the stock strap, not that you need a super strap to hold the alternator or generator.
Application:Part #: 042903109ABR
This is the pulley on the generator that holds the belt.
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: GR15X
Generators supply the battery with voltage. Rebuilt + Core
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: SR11XCO
This is what starts the car.
Application:Part #: 111119141A
Cooling Fan Nut
Application:Part #: 1903137
Replacement belt for Serpentine belt driven Alternator or Generator
Application:Bug (Type 1); 40-1600
Bus (Type 2); 40-1600
KG; 40-1600
Thing; All
Offroad; 40-1600
Part #: JC86030
Jaycee Billet Alternator Pulley, Silver
Application:Part #: SR15HT
This is what starts the car.
Application:Part #: AL27XCO
This unit supplies the battery with voltage.
Application:Part #: SRHT6V
A 6volt gear that fits the high torque starter.
Application:
This is what starts the car.